Shift Paddle Switch: Removal

WARNING: This page is about a different variant/trim than selected.

ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

(See PRECAUTION )
REMOVE LOWER NO. 2 STEERING WHEEL COVER (See step 4 in REMOVAL )
REMOVE LOWER NO. 3 STEERING WHEEL COVER (See step 3 in REMOVAL )
REMOVE STEERING PAD (See step 5 in REMOVAL )
REMOVE STEERING WHEEL ASSEMBLY (See step 11 in REMOVAL )
REMOVE SHIFT PADDLE SWITCH
1. Disconnect the clamp from the steering wheel assembly.
2. Disconnect the switch wire connector from the steering wheel assembly.
  
  Fig 1: Disconnecting Clamp From Steering Wheel Assembly
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. Disconnect the 2 connectors from the 2 shift paddle switches, and remove the switch wire.
  
  Fig 2: Disconnecting Connectors From Shift Paddle Switches
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. Remove the 4 screws, 2 brackets and 2 shift paddle switches.
Fig 3: Removing Screws, Brackets & Shift Paddle Switches
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.