LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System (2GR-FSE)) >> Camshaft Timing Oil Control Valve Assembly >> Removal

Camshaft Timing Oil Control Valve Assembly: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  2. REMOVE ENGINE ROOM SIDE COVER LH (See  REMOVAL  ) 
  3. REMOVE ENGINE ROOM SIDE COVER RH (See  REMOVAL  ) 
  4. REMOVE V-BANK COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE FRONT FENDER PROTECTOR UPPER RH (See  REMOVAL  ) 
  6. REMOVE FRONT FENDER PROTECTOR UPPER LH (See  REMOVAL  ) 
  7. REMOVE ROOF DRIP SIDE FINISH MOULDING RH (See  REMOVAL  ) 
  8. REMOVE ROOF DRIP SIDE FINISH MOULDING LH (See  REMOVAL  ) 
  9. REMOVE FRONT WIPER ARM HEAD CAP (See  REMOVAL  ) 
  10. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH (See  REMOVAL  ) 
  11. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH (See  REMOVAL  ) 
  12. REMOVE COWL TOP VENTILATOR LOUVER SUBASSEMBLY (See  REMOVAL  ) 
  13. DRAIN ENGINE COOLANT (See  COOLANT  ) 
  14. REMOVE NO. 2 VENTILATION HOSE (See  REMOVAL   ) 
  15. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (See  REMOVAL   ) 
  16. REMOVE THROTTLE BODY (See  REMOVAL   ) 
  17. REMOVE INTAKE AIR SURGE TANK (See  REMOVAL  ) 
  18. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Exhaust Side) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 1: Identifying Camshaft Timing Oil Control Valve (For Bank 1 Exhaust Side)
      G04054914Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 1 Intake Side) 
    1. Remove the bolt and V-bank cover bracket.
      Fig 2: Identifying V-Bank Cover Bracket
      G04054915Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the oil control valve connector.
    3. Remove the bolt and oil control valve.
    4. Remove the O-ring from the oil control valve.
      Fig 3: Identifying Camshaft Timing Oil Control Valve (For Bank 1 Intake Side)
      G04054916Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side) 
    1. Disconnect the oil control valve connector.
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
      Fig 4: Identifying Camshaft Timing Oil Control Valve (For Bank 2 Intake Side)
      G04054917Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side) 
    1. Disconnect the wiring harness to the bracket.
    2. Remove the bolt and bracket.
      Fig 5: Identifying Bracket
      G04054918Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the oil control valve connector.
    4. Remove the bolt and oil control valve.
    5. Remove the O-ring from the oil control valve.
      Fig 6: Identifying Camshaft Timing Oil Control Valve (For Bank 2 Exhaust Side)
      G04054919Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals