LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter >> Fuel Sender Gauge Assembly >> Removal

Fuel Sender Gauge Assembly: Removal

  1. DISCHARGE FUEL SYSTEM PRESSURE 

    HINT:

    (See FUEL SYSTEM )

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).
  3. REMOVE REAR SEAT CUSHION ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE NO. 2 REAR FLOOR SERVICE HOLE COVER (See  REMOVAL  ) 
  5. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (See  REMOVAL  ) 
  6. REMOVE FUEL SENDER GAUGE ASSEMBLY (for LH Side) (See  REMOVAL  ) 
  7. REMOVE REAR FLOOR SERVICE HOLE COVER (See  REMOVAL  ) 
  8. REMOVE FUEL SENDER GAUGE ASSEMBLY (for RH Side) (See  REMOVAL  ) 
scientia non olet · About LEMON Manuals