DTC U0100, U0122, U0146, U0151, U1101: Lost Communication with ECM/PCM "A "; Lost Communication with Vehicle Dynamics Control Module; Lost Communication with Gateway "A "; Lost Communication with Airbag ECU; Lost Communication with Distance Control ECU: Description

The seat belt control ECU receives signals from the skid control ECU and gateway ECU and center airbag sensor assembly and distance control ECU via CAN communication system.

The distance control ECU receives signals from the ECM via CAN communication system.

DTC TABLE

DTC No.	DTC Detection Item	Inspection Area
U0100	ECM communication error	CAN communication system ECM Distance control ECU
U0122	Skid control ECU communication error	CAN communication system Skid control ECU Seat belt control ECU
U0146	Network gateway ECU communication error	CAN communication system Gateway ECU Seat belt control ECU
U0151	Center airbag sensor communication error	CAN communication system Center airbag sensor assembly Seat belt control ECU
U1101	Distance control ECU communication error	CAN communication system Distance control ECU Seat belt control ECU

HINT:

When two or more DTCs starting with "U " are output simultaneously, inspect the connectors and wire harness of each ECU.

Refer to the U0100 (CAN communication system) (See ECM COMMUNICATION STOP MODE ).

Refer to the U0122 (CAN communication system) (See SKID CONTROL ECU COMMUNICATION STOP MODE ).

Refer to the U0146 (CAN communication system) (See GATEWAY ECU COMMUNICATION STOP MODE ).

Refer to the U0151 (CAN communication system) (See CENTER AIRBAG SENSOR COMMUNICATION STOP MODE ).

Refer to the U1101 (CAN communication system) (See DISTANCE CONTROL ECU COMMUNICATION STOP MODE ).