Engine Coolant Temperature Receiver Gauge
- Operation Inspection - See ENGINE COOLANT TEMPERATURE GAUGE CIRCUIT under CIRCUIT TESTS.
- Resistance Inspection - Measure the resistance between terminals with fixing pointer to the stopper. See CONNECTOR IDENTIFICATION . See INSPECTING RESISTANCE WITH FIXING POINTER TO STOPPER table. If the resistance value is not as specified, replace the receiver gauge. See COMBINATION METER under REMOVAL & INSTALLATION.
NOTE:
This circuit includes the diode.
INSPECTING RESISTANCE WITH FIXING POINTER TO STOPPER
| Tester Connection | Resistance (Ohms) |
|---|---|
| A - B | 140-185 |
| C - D | 130-175 |