LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Vacuum Brake Booster >> Installation (LS 430)

Installation (LS 430)

  1. Install clevis to operating rod.
  2. Install brake booster and NEW gasket. Install and tighten booster installation nuts to specification. See TORQUE SPECIFICATIONS .
  3. Install clevis pin into clevis and brake pedal. Install clip to clevis pin. Install pedal return spring.
  4. Ensure power brake unit push rod length is correct. See POWER BRAKE UNIT PUSH ROD  under ADJUSTMENTS.
  5. Install master cylinder. See MASTER CYLINDER .
  6. Fill brake reservoir with brake fluid and bleed brake system. See BLEEDING BRAKE SYSTEM .
  7. Check for fluid leakage. Ensure brake pedal height is correct. See BRAKE PEDAL HEIGHT & FREE PLAY  under ADJUSTMENTS.
  8. Install No. 1 safety pad and No. 1 under cover. Perform operational check. See VACUUM BRAKE BOOSTER  under TESTING.
scientia non olet · About LEMON Manuals