LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2002 >> IS 300 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Adjustments >> Parking Brake Shoe Clearance >> Lx 470

Lx 470

  1. Disconnect parking brake cable from bellcrank.
  2. Remove bellcrank spring.
  3. Loosen bellcrank adjusting bolt.
  4. Temporarily install 3 lug nuts.
  5. Remove access plug.
  6. Turn adjuster and expand shoes until disc locks. See Figure.
  7. Back off adjuster 8 notches.
  8. Install access plug.
  9. Pull bellcrank until all play in interior linkage is taken up.
  10. Screw in bellcrank adjusting bolt until it touches on dust seal. See Fig 1.
  11. Loosen bellcrank adjusting bolt one turn, and lock with lock nut. Tighten to specification. See TORQUE SPECIFICATIONS .
  12. Install bellcrank spring. Connect parking brake cable. Remove lug nuts.
  13. Seat parking brake shoes and disc. See SEATING PARKING BRAKE SHOES AND DISC .
  14. Recheck and adjust parking brake lever travel. See PARKING BRAKE LEVER .
Fig 1: Adjusting Bellcrank
G00185203Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals