Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control Module Cavity
- Circuit reference PMZ CAN H
- Circuit reference PMZ CAN L
- Purpose of the DTC
- This DTC is used to confirm the integrity of the CAN communication line between the ESC and PCM
- Prioritized List of Possible Causes
- Electric supercharger connector is disconnected, connector pin is backed out, connector pin corrosion
- PCM connector is disconnected, connector pin is backed out, connector pin corrosion
- Harness failure - Wiring integrity short circuit to ground, short circuit to power, open circuit, high resistance
- Electric supercharger failure