DTC P00BE-84: Mass or Volume Air Flow "B" Circuit Range/Performance - Air Flow Too Low - Signal below allowable range: Action
WARNING: This page is about a different variant/trim than selected.
- Vehicle Conditions to enable DTC
Logging Strategy
- Drive the vehicle with engine speed between 1000 and 3000 rpm under steady state conditions for 20-30 seconds
- Prioritized Checks to Perform
- Refer to the relevant service information and check for
- Correctly installed components
- Loose hose clips
- Air leakage
- Air filter is serviceable
- Install new mass air flow sensor, only when diagnosed as failed