Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control Module Cavity
- Circuit reference I_A_COT
- Purpose of the DTC
- Detect that the sensor has stuck and is no longer providing data
- Prioritized List of Possible Causes
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Post turbocharger compressor temperature sensor - Wiring integrity
- Short circuit to ground
- Short circuit to power
- Open circuit
- High resistance
- Post turbocharger compressor temperature sensor failure