Fuel Rail (G2300867): Installation
WARNING: This page is about a different variant/trim than selected.
-
CAUTION: Make sure the threads are clean and free from fuel.
- Lubricate the threads with silicone free lubricant.
Material: Silicone Free Lubricant ()
- Install the fuel rail pressure sensor.
Torque : 38 Nm
- Lubricate the threads with silicone free lubricant.
- Install the fuel injectors.
Refer to: FUEL INJECTORS
- Connect the startup battery ground cable.
Refer to: SPECIFICATIONS
- Bleed the high pressure fuel system.
Refer to: HIGH-PRESSURE FUEL SYSTEM BLEEDING