High-Pressure Fuel System Bleeding (G2748408)
| 19.50.24 | FUEL SYSTEM BLEED - HIGH PRESSURE | ALL DERIVATIVES | 0.10 |
WARNING:
Avoid flames, sparks or lighted substances.
CAUTION:
This procedure is necessary if any of the following fuel system components are removed, disconnected or replaced:
- High pressure fuel pump
- High pressure fuel lines
- Fuel injectors
- Before handling any components within the fuel system make sure that the fuel health and safety guidelines are followed. For additional information, Refer to: PETROL AND PETROL-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS /DIESEL FUEL SYSTEM HEALTH AND SAFETY PRECAUTIONS
-
CAUTION: Do not start the engine.
Repeat the following procedure 3 times.
- Set the ignition to the ON position.
- Wait for 65 seconds.
- Set the ignition to the OFF position.
-
CAUTION: Do not crank the engine for more than 20 seconds.
Start the engine and allow to idle for 60 seconds.