LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - TDV6 3.0L Diesel -- Range Rover Velar/L560) >> Engine - TDV6 3.0L Diesel (G2297235) >> Removal And Installation >> Crankshaft Vibration Damper (G2165823) >> Installation

Crankshaft Vibration Damper (G2165823): Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Tighten the bolts in a diagonal sequence.
    NOTE: Install the bolt finger tight before final tightening.

    Install the crankshaft vibration damper.

    Torque  : 25 Nm 

  2. Install the accessory drive belt.
  3. Install the charge air cooler.

    Refer to: CHARGE AIR COOLER

  4. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals