Timing Chain(S), Guide(S) And TENSIONER(S) (G2735403): Removal
WARNING: This page is about a different variant/trim than selected.
CAUTION:
If the lower timing chain is removed, new lower timing chain guides and tensioners must be installed.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Disconnect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING
- Remove the upper timing chain.
Refer to: UPPER TIMING CHAIN - REMOVE FOR ACCESS
- Remove the lower timing cover.
Refer to: LOWER TIMING COVER
The timing chain will not be under tension at the positions illustrated.
- Remove the bolts.
- Remove and discard the lower timing chain tensioner.
- Remove the bolt.
- Remove and discard the lower timing chain guide.
- Remove the bolt.
- Remove and discard the lower timing chain guide.
- Remove the retaining bolt.
- Remove the lower timing chain drive sprocket.
Remove and discard the lower timing chain guide.
Remove the lower timing chain.