Oil Pump Chain (G1947481): Installation

WARNING: This page is about a different variant/trim than selected.

CAUTION: Make sure a new oil pump sprocket bolt is installed.
- Install the oil pump chain and the gear assembly.
- Make sure that the oil pump sprocket is aligned with the oil pump shaft correctly.
- Using the special tool to hold the oil pump sprocket, install and tighten the bolt.
  Special Tool(s): 205-053
  
  Renew Part: Oil pump gear bolt Quantity: 1 .
  
  Torque
  
  Stage 1: 60 Nm
  
  Stage 2: 90°
Install the oil pan.
Refer to: OIL PAN
Lower the vehicle.
Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT