LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Starting System - V6 S/C 3.0L Petrol -- Range Rover Velar/L560) >> Starting System - V6 S/C 3.0L Petrol >> Removal And Installation >> Starter Motor (G2110300) >> Installation

Starter Motor (G2110300): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Connect the breather pipes and the clip.
  2. Install the starter motor.

    Torque  : 48 Nm 

  3. Install the wiring harness nut.

    Torque  : 7 Nm 

  4. Connect the battery cable.

    Torque  : 12 Nm 

  5. Secure the terminal cover.
  6. Install the heatshield.

    Torque  : 6 Nm 

  7. Install the exhaust system.

    Refer to: EXHAUST SYSTEM

  8. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals