LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Glow Plug System - TDV6 3.0L Diesel -- Range Rover Velar/L560) >> Glow Plug System - TDV6 3.0L Diesel >> Removal And Installation >> Glow Plug Module (G1879761) >> Installation

Glow Plug Module (G1879761): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the glow plug module and bracket.
    • Install and tighten the nut.

      Torque  : 10 Nm 

    • Connect the 2 electrical connectors.
  2. Install the front right fender splash shield.

    Refer to: FENDER SPLASH SHIELD

  3. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals