Right Fuel Rail (G1879937): Installation
WARNING: This page is about a different variant/trim than selected.
- CAUTION:
- Make sure that a new component is installed.
- Tighten the fuel supply line unions finger tight.
Renew Part: Fuel rail balance pipe Quantity: 1 .
-
CAUTION: Tighten the fuel supply line unions finger tight.
-
CAUTION: Tighten the fuel supply line clamp bolt finger tight.
- CAUTION:
- Make sure that new components are installed.
- Tighten the fuel supply line unions finger tight.
Renew Part: Right fuel rail supply pipe Quantity: 1 .
-
CAUTION: Tighten the retaining bolt finger tight.
Torque : 24 Nm
-
CAUTION: Tighten the fuel supply line unions finger tight.
-
CAUTION: Tighten the fuel supply line unions finger tight.
- CAUTION:
- Make sure that new components are installed.
- Tighten the fuel supply line unions finger tight.
Renew Part: Fuel injector high pressure pipe(s) Quantity: 3 .
-
CAUTION: Tighten the fuel supply line clamp bolt finger tight.
Torque
Fuel supply line unions to fuel rail: 15 Nm
Fuel supply line unions to fuel injectors: 15 Nm
Renew Part: Fuel rail balance pipe Quantity: 1 .
Torque : 15 Nm
Torque : 15 Nm
Renew Part: Right fuel rail supply pipe Quantity: 1 .
Torque : 15 Nm
Torque : 15 Nm
Torque
Fuel supply line unions to fuel rail: 35 Nm
Fuel supply line unions to fuel injectors: 35 Nm
Torque : 35 Nm
Torque : 35 Nm
Torque : 35 Nm
Torque : 35 Nm
Torque : 10 Nm
Torque : 10 Nm
Torque : 10 Nm
Torque : 10 Nm
Torque : 10 Nm
Torque : 10 Nm
-
CAUTION: Be prepared to collect escaping fuel.NOTE: Make sure that the fuel injector return line has a maximum of 8 uses.
- Refer to: RIGHT EXHAUST GAS RECIRCULATION VALVE
- Refer to: EXHAUST GAS RECIRCULATION VALVE OUTLET TUBE
Torque : 10 Nm
- Refer to: ENGINE COVER - TDV6 3.0L DIESEL
- Refer to: STARTUP BATTERY DISCONNECT AND CONNECT