LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Electronic Engine Controls - TDV6 3.0L Diesel -- Range Rover Velar/L560) >> Electronic Engine Controls - TDV6 3.0L Diesel >> Removal And Installation >> Oil Temperature Sensor (G1085510) >> Installation

Oil Temperature Sensor (G1085510): Installation

WARNING: This page is about a different variant/trim than selected.
    • Install the oil temperature sensor.
    • Install the 3 retaining bolts.

      Torque  : 10 Nm 

  2. Vacuum fill the engine oil.

    Refer to: ENGINE OIL VACUUM DRAINING AND FILLING

  3. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals