Secondary Bulkhead Lower Panel - V8 S/C 5.0L Petrol (G2340002): Removal
WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Disconnect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Remove the engine assembly.
Refer to the appropriate Engine System article
- Disconnect the steering column intermediate shaft from the steering column.
Refer to: LOWER STEERING COLUMN TRIM
- Remove the secondary bulkhead left outer panel.
Refer to: SECONDARY BULKHEAD LEFT OUTER PANEL - V8 S/C 5.0L PETROL
- Remove the secondary bulkhead right outer panel.
Refer to: SECONDARY BULKHEAD RIGHT OUTER PANEL - V8 S/C 5.0L PETROL
- Remove the 2 retaining bolts.
- Remove the secondary bulkhead lower panel.