Secondary Bulkhead Lower Panel - TDV6 3.0L Diesel (G2049169): Installation

WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.

- Install the secondary bulkhead lower panel.
- Install and tighten the 2 bolts.
  Torque : 5.4 Nm
Install the steering column lower shaft.
Refer to: STEERING COLUMN LOWER SHAFT
Install the secondary bulkhead left panel.
Refer to: SECONDARY BULKHEAD LEFT PANEL - TDV6 3.0L DIESEL
Install the engine assembly.
Refer to: ENGINE
Connect the startup battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT