LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- Range Rover Velar/L560 >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Radiator (G2135455) >> Removal

Radiator (G2135455): Removal

NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING

  2. Disconnect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  3. Drain the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

  4. Remove the cooling fan and motor shroud.

    Refer to: ELECTRIC COOLING FAN AND SHROUD 

  5. G14286133Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the radiator support bracket.

  6. CAUTION: Be prepared to collect escaping coolant.
    G14286134Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the radiator assembly.

scientia non olet · About LEMON Manuals