LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- Range Rover Velar/L560 >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Radiator (G2135455) >> Installation

Radiator (G2135455): Installation

  1. Install the radiator assembly into the correct position. Make sure that the 2 retaining clips are correctly located.
  2. Install the radiator support bracket and tighten the 2 bolts to the correct torque.

    Torque  : 9 Nm 

  3. Install the cooling fan and motor shroud.

    Refer to: ELECTRIC COOLING FAN AND SHROUD 

  4. Vacuum fill the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

  5. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals