Transfer Case Fluid Level Check
| 41.25.05 | IRD fluid - check and top-up | All Derivatives | 0.3 |
PART(S)
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Step 5 | Transfer case fluid level plug washer | 1 |
CAUTION:
The fluid filler plug is not a fluid level plug.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD .
-
CAUTION: Make sure that the area around the component is clean and free of foreign material.NOTE: Remove and discard the sealing washer.
-
CAUTION: The fluid filler plug is not a fluid level plug.
Fill the transfer case with the recommended fluid.
Refer to: SPECIFICATIONS .
-
NOTE: Install a new sealing washer.
Renew Part: Transfer case fluid level plug washer Quantity: 1 .
Torque Specification: 35 Nm
- Refer to: ENGINE UNDERSHIELD .