LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Exhaust System - TDV6 3.0L Diesel -- Range Rover/L405) >> Exhaust System - TDV6 3.0L Diesel >> Catalytic Converter >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: Make sure the anti-seize compound does not contact the heated oxygen sensor (HO2S) tip.

    To install, reverse the removal procedure.

  2. NOTE: Install the retaining clamp.
    G11708026

    Torque Specification: 55 Nm 

scientia non olet · About LEMON Manuals