Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: EXHAUST SYSTEM - VEHICLES WITH: DIESEL PARTICULATE FILTER (DPF)
Refer to: EXHAUST SYSTEM - VEHICLES WITHOUT: DIESEL PARTICULATE FILTER (DPF)
- Refer to: ENGINE UNDERSHIELD
-
NOTE: Engine shown removed for clarity.
-
CAUTION: Remove the Torx screws evenly and progressively.
Using a suitable 130mm T30 Torx socket, remove the retaining bolts.
-
NOTE: Make a note of the orientation of the gasket tang.
-
NOTE: Remove and discard the gasket.