Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- The powertrain control module detected failure when comparing two or more input parameters for plausibility
- The brake pedal switch signal received over communication network is defective
- Brake pedal switch detached from pedal box while electrically connected
- Brake pedal switch adjustment incorrect
- Brake pedal switch harness failure
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Brake pedal switch failure