LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Exhaust System - TDV6 3.0L Diesel -- Range Rover/L405) >> Exhaust System - TDV6 3.0L Diesel >> Catalytic Converter >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure the anti-seize compound does not contact the heated oxygen sensor (HO2S) tip.

    To install, reverse the removal procedure.

  2. NOTE: Install the retaining clamp.
    G11708026

    Torque Specification: 55 Nm 

scientia non olet · About LEMON Manuals