DTC U0080-87: Vehicle Communication Bus F - Missing message: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- The responses from DID 0xD020 and possible causes for this DTC are as follows
- Response 0xC95
- Check ALCM fuses and try to establish diagnostic communication with the ALCM
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x0D6
- Check ATCM fuses and try to establish diagnostic communication with the ATCM
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0xE4A
- Check ATCM3 fuses and try to establish diagnostic communication with the ATCM3
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0xA09
- Check AWD fuses and try to establish diagnostic communication with the AWD
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x79E
- Check CJB fuses and try to establish diagnostic communication with the CJB
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x729
- Check CCM fuses and try to establish diagnostic communication with the CCM
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x120
- Check CHCM fuses and try to establish diagnostic communication with the CHCM
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x0F9
- Check CHCMB fuses and try to establish diagnostic communication with the CHCMB
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x995
- Check FACP fuses and try to establish diagnostic communication with the FACP
- Check FlexRay bus
- Check CAN connection to GWM
- Response Ox12AE
- Check Touch Screen fuses and try to establish diagnostic communication with the Touch Screen
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x25F
- Check GSM fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x024
- Check GWM fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Response 0x0E3
- Check automatic temperature control module fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x76C
- Check IPC fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response Ox119E
- Check image processing control module fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x38B
- Check parking assist control module fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x256
- Check electric park brake control module fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0x247
- Check power steering control module fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0xlE3
- If combined with B10A2-32, check restraints control module fuse/communication and crash interface circuit
- If combined with U0151-08 and U0151-00 and B10A2-32 and U0405-84 and possibly with B1142-62 in the GSM, check for the ignition sense line high when the PowerMode_HS is less than 6 (ignition high when the vehicle has been switched off)
- Check CAN connection to GWM
- Response 0x499
- Check SASM fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Check CAN connection to GWM
- Response 0xl9F
- Check TCCM fuses and try to establish diagnostic communication with the module
- Check FlexRay bus
- Response 0x040
- Check ABS fuses and try to establish diagnostic communication with the ABS
- Check FlexRay bus