Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- Oil level sensor permanently high signal check
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference I_T_OCS
- Circuit reference G_G_OCS
- Monitor Description
- The status of the oil level sensor signal above the maximum threshold
- The powertrain control module detected insufficient duration for one cycle of the output across a specified sample size
- Oil level and temperature sensor circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Oil level and temperature sensor failure