LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover County >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Air Suspension - 3.9L & 4.2L >> Removal & Installation >> Electronic Control Unit (Ecu) >> Installation

Electronic Control Unit (Ecu): Installation

  1. Fit ECU into retaining clip.
  2. Fit retaining screw.
  3. Connect ECU harness plug. Ensure plug retaining clip engages.
  4. Reverse remaining removal procedures.
  5. If fitting a new ECU, recalibrate height settings. See EAS SYSTEM CALIBRATION  under PROGRAMMING.
scientia non olet · About LEMON Manuals