Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (CLU ↔ Chassis ground) |
|
CLU connector | 40 (hot at all power) | Chassis ground | - | B+ |
| CLU connector | 39 (ON/START Input) | Chassis ground | - | B+ | ||
| Open in circuit inspection (CLU ↔ Chassis ground) |
|
CLU connector | 1, 37 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "OPEN IN CAN COMMUNICATION LINE INSPECTION " procedure.
No Good
- Repair open or short in circuit and then Go to "VERIFICATION OF REPAIR " procedure.