LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> ADAS Driving Ecu Diagnosis >> DTC C1628-87: CAN Time-Out Cluster >> Wiring Inspection >> Circuit Inspection >> Open In CAN Communication Line Inspection

Open In CAN Communication Line Inspection

Inspection Item Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
Open in circuit Inspection (CLU ↔ ICU)
  1. Ignition "OFF".
  2. Disconnect the CLU and ICU connector.
CLU connector 32 (C-CAN high) ICU connector 19 (C-CAN high) Approx. below 1Ω
CLU connector 33 (C-CAN low) ICU connector 20 (C-CAN low) Approx. below 1Ω
Open in circuit inspection (ADAS_DRV ↔ ICU)
  1. Ignition "OFF".
  2. Disconnect the ADAS_DRV and ICU connector.
ADAS_DRV connector 10 (C-CAN high) ICU connector 19 (C-CAN high) Approx. below 1Ω
ADAS_DRV connector 4 (C-CAN low) ICU connector 20 (C-CAN low) Approx. below 1Ω

Good 

No Good