Removal And Installation: Removal

WARNING:

When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
When working on the high voltage system or related components, be sure to observe and be aware of the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ". If not, it may cause serious accidents due to electric shock or short circuit.

Remove the crash pad lower panel [Driver's side].
(Refer to Crash Pad - "CRASH PAD LOWER PANEL ")
Separate the front part of the cluster fascia panel (A) in the direction of the arrow using the service hole (B).

Courtesy of KIA MOTORS AMERICA, INC.
Turn the steering wheel left and right to remove the screws (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the steering column shroud panel (A) after removing the screw.

Courtesy of KIA MOTORS AMERICA, INC.