Removal And Installation: Removal
WARNING:
- When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
- When working on the high voltage system or related components, be sure to observe and be aware of the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ". If not, it may cause serious accidents due to electric shock or short circuit.
- Remove the crash pad lower panel [Driver's side].
(Refer to Crash Pad - "CRASH PAD LOWER PANEL ")
- Remove the crash pad switch panel (A) after removing the screw.
Information
Clip position: Dotted circles
- Disconnect the connector (A).