Component Inspection
WARNING: This page is about a different variant/trim than selected.
| Inspection Condition | (+) Probe | (-) Probe | Reference | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Ignition coil connector | 4 (power) | Ignition coil connector | 2 (control) | Fig.1 |
| Ignition coil connector | 3 (feedback) | Ignition coil connector | 1 (ground) | ||
Good
- Go to "Verification of Repair " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the ignition coil and go to "Verification of Repair " procedure.