| DTC Strategy |
- Check on the inlet lock actuator
|
- Inlet lock actuator
- Poor contact of connector (inlet to OBC)
|
| Detecting Condition |
- Charging connector connected and ignition "ON"
- Auxiliary battery voltage: 9 to 16V
- No inlet lock sensing circuit performance error/high voltage/low voltage
|
| Threshold Value |
- Check inlet lock actuator position sensing state "fault" in current data with KDS
- When the reference voltage of the position sensor differs by more than ±0.4V when the locking device is open/closed
|
| Detecting Time |
|
| MIL On Condition |
|
| Service Lamp On Condition |
|