LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> On Board Charger Diagnosis (PHEV) (2 Of 2) >> DTC P0D94-92: Battery Charger Coupler Lock Control Circuit Performance >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Check on the inlet lock actuator operating
  • Inlet lock actuator
  • Poor contact of connector or signal circuit of inlet lock control
Case 1 Detecting Condition
  • Charging connector connected and ignition "ON"
  • Auxiliary battery voltage: 9 to 16V
  • No inlet lock sensing circuit performance error/high voltage/low voltage
  • No inlet lock control circuit error
Threshold Value
  • Check inlet lock actuator operation state "fail" in current data with KDS
  • Check OBC1 CAN signal "OBC_InletFailSta=1"
  • Visually check that the locking device is not locked
Detecting Time
  • Immediately
Case 2 Detecting Condition
  • Charging connector connected and ignition "ON"
  • No inlet lock control circuit error
  • Auxiliary battery voltage: 9 to 16V
Threshold
Value
  • Inlet relay driver lock input signal and output signal mismatch
Detecting Time
  • 3 times
MIL On Condition
  • -
Service Lamp On Condition
  • -
scientia non olet · About LEMON Manuals