LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2023 >> Sorento Plug-In Hybrid SX Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Control System (PHEV)) >> Oil Pressure And Oil Temperature Sensor (OPTS) >> Repair Procedures >> Inspection >> Component inspection

Component inspection

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Oil Pressure And Oil Temperature Sensor (OPTS).

    (Refer to Oil Pressure And Oil Temperature Sensor (OPTS) - "REMOVAL ")

  2. Measure resistance between terminal 1 and terminal 4.
  3. Check that the resistance is within the specification.

    Specification:  Refer to SPECIFICATION 

scientia non olet · About LEMON Manuals