Circuit Inspection
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Crash pad switch connector | 8 (ground) | Chassis ground | - | Approx. below 1Ω |
| Crash pad switch connector | 11 (LDWS switch) | FR_CMR connector | 5 (LDWS switch) | Approx. below 1Ω | |
|
FR_CMR connector | 5 (LDWS switch) | Chassis ground | - | Approx 7.5V |
|
FR_CMR connector | 5 (LDWS switch) | Chassis ground | - | Approx 3.3V |
|
FR_CMR connector | 11 (ground) | Chassis ground | - | Approx. below 1Ω |
|
FR_CMR connector | 7 (ON/START Input) | Chassis ground | - | B+ |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair open or short in circuit and then Go to "Verification Of Repair " procedure.