Component Inspection

WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Inspection Condition	Inspection Procedure	Reference
Engine "ON".	Activate the LDWS/LAKS switch. Check the light of FR_CMR on the instrument cluster.	Fig.1

Courtesy of KIA MOTORS AMERICA, INC.

Good

Go to "Verification Of Repair " procedure.
If no problems were found with the circuits or connectors, replace the FR_CMR ECU and Go to "Verification Of Repair " procedure.
* In case of replacing FR_CMR ECU, perform following "System Inspection" procedures.

No Good

If no problems were found with the circuits or connectors, replace the crash pad switch and Go to "Verification Of Repair " procedure.