Inspection Procedure
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
- Check fuses and relays.
- Check auxiliary battery terminals and charge status.
- Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
- Check OPU high voltage (DC IN) connectors for looseness poor connection bending corrosion contamination deterioration or damage.
- Check the connector connection of male and female after disconnecting a OPU high voltage (DC IN) connectors.
- Is it found any problems out?
Good
- Go to "CIRCUIT INSPECTION " procedure.
No Good
- Repair as necessary and then Go to "Verification Of Repair " procedure.