SPDIF Inspection
WARNING: This page is about a different car, the 2024 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
| SPDIF Inspection | |||||
|---|---|---|---|---|---|
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
| Connector | Terminal | Connector | Terminal | ||
| 1. Ignition "OFF". 2. Disconnect the electrical connector(s) from concerned component. |
AVN connector | 18 (SPDIF Low (-)) | AMP connector | 21 (SPDIF OUT (-)) | Approx. below 1Ω |
| AVN connector | 4 (SPDIF High (+)) | AMP connector | 20 (SPDIF OUT (+)) | Approx. below 1Ω | |
| AVN connector | 19 (SPDIF Shield) | AMP connector | 22 (SPDIF Shield) | Approx. below 1Ω | |
Good
• Go to ("Module Inspection ") procedure.
No Good
• Repair as necessary and then go to ("Verification Of Repair ") procedure.
• Repair open or short in circuit and then go to ("Verification Of Repair ") procedure.