LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Sedona EX >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System Diagnosis (2 Of 3) >> DTC B1475-00: Inflatable Curtain Airbag Driver Resistance Circuit Short To Ground >> Wiring Inspection >> Squib Circuit Inspection

Squib Circuit Inspection

  1. Ignition switch "OFF".
  2. Disconnect (-) terminal cable from battery and wait for 1 minutes or more.
  3. Remove the DCAB connector and connect the dummy and dummy adapter to the DCAB connector.
    CAUTION: If dummy and dummy adaptor are not able to be prepared, use a known-good DCAB or 2Ω resistor.
  4. Connect (-) terminal cable to battery and Ignition switch "ON" & Engine "OFF" and wait for 30 seconds or more.
  5. Connect KDS to Data Link Connector (DLC) and clear DTC with KDS and diagnose again.
  6. Is any DTC present?

    YES 

    NO