LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2016 >> Optima SX Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Lighting System (HEV)) >> High Mounted Stop Lamp >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative(-) battery terminal.
  2. Remove the rear seat.

    (Refer to "Rear Seat ".)

  3. Remove the package tray trim (A).

    (Refer to "Package Tray Trim Replacement ".)

    Fig 1: Removing Package Tray Trim
    G11818280Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the soundproofing felt (A) to remove the wiring.
    Fig 2: Removing Soundproofing Felt
    G11818281Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the high mounted stop lamp after removing screws and hook (A) carefully.
Fig 3: Removing High Mounted Stop Lamp
G11818282Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals