LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Sephia Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Front Disc Brake >> Installation

Front Disc Brake: Installation

  1. Mount a new or repaired rotor on hub and fasten with two mounting screws.
  2. Mount the supporting plate with two hex-head bolts.

    Tightening torque: 33~49 lb.ft (45~67 N.m, 4.6~6.8 kg.m) 

  3. Connect the brake hose to the caliper using a flare nut wrench.

    Tightening torque: 9~13 lb.ft (13~18 N.m, 1.3~1.8 kg.m) 

  4. Position brake pads in caliper cavity and install caliper onto supporting plate.
  5. Lubricate and install two bolts and bushings, and tighten bolts to specification.

    Tightening torque: 19~21 lb.ft (26~28 N.m, 2.6~3.0 kg.m) 

  6. Install caps.
  7. Bleed system. See AIR BLEEDING (CBS) .
  8. Inspect system for any leaks.
scientia non olet · About LEMON Manuals