Section 22 (Battery Pack Control Module (BPCM) - DTCS P0AA1-00 To P0AC2-00)

• DTC Troubleshooting
  • P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AA2-00-Hybrid/EV Battery Positive Contactor Circuit Stuck Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AA4-00-Hybrid Battery Negative Contactor Circuit Stuck Closed
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AA5-00-Hybrid/EV Battery Negative Contactor Circuit Stuck Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AA6-00-Hybrid Battery Voltage System Isolation Fault
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AA7-00-Hybrid/EV Battery Voltage Isolation Sensor Circuit
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0ABA-00-Hybrid/EV Battery Pack Voltage Sense A Circuit
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0ABB-00-Hybrid Battery Pack Voltage Sense 1 Circuit Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0ABC-00-Hybrid Battery Pack Voltage Sense A Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0ABD-00-Hybrid Battery Pack Voltage Sense 1 Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AC0-00-Hybrid Battery Pack Current Sensor 1 Circuit Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AC1-00-Hybrid Battery Pack Current Sensor 1 Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0AC2-00-Hybrid Battery Pack Current Sensor 1 Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test