Section 21 (Battery Pack Control Module (BPCM) - DTCS B1CE9-00 To P0A9E-00)

• DTC Troubleshooting
  • B1CE9-00-Digital Crash Output Control Circuit Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B273C-00-Digital Crash Input
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0562-00-System Voltage Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0563-00-System Voltage High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0607-00-Ecu Internal Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0A0A-00-High Voltage System Interlock Circuit A
    • High Voltage Warning
    • Theory Of Operation - HVIL Loop
    • Functional Description - HVIL Circuit
    • Preliminary Diagnostic Checks
    • Check For An Active Or Intermittent Condition
    • Enabling Conditions And Possible Causes-High Voltage Interlock (HVIL)
    • Diagnostic Test - HVIL Loop Using The MOPAR Scope
    • Diagnostic Test - HVIL Loop Using The Scan Tool And MOPAR Scope
    • HV Verification Test
  • P0A0C-00-High Voltage System Interlock Circuit A Low
    • High Voltage Warning
    • Theory Of Operation - HVIL Loop
    • Functional Description - HVIL Circuit
    • Check For An Active Or Intermittent Condition
    • Enabling Conditions And Possible Causes-High Voltage Interlock (HVIL)
    • Diagnostic Test - HVIL Loop Using The MOPAR Scope
    • Diagnostic Test - HVIL Loop Using The Scan Tool And MOPAR Scope
    • HV Verification Test
  • P0A0D-00-High Voltage System Interlock Circuit A High
    • High Voltage Warning
    • Theory Of Operation - HVIL Loop
    • Functional Description - HVIL Circuit
    • Check For An Active Or Intermittent Condition
    • Enabling Conditions And Possible Causes-High Voltage Interlock (HVIL)
    • Diagnostic Test - HVIL Loop Using The MOPAR Scope
    • Diagnostic Test - HVIL Loop Using The Scan Tool And MOPAR Scope
    • HV Verification Test
  • P0A7F-00-Hybrid/EV Battery Pack Deterioration
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0A95-00-High Voltage Fuse A
    • WL PHEV Battery Pack HV Fuses And Power Inverter Module (PIM) HV Fuses
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0A9C-00-Hybrid/EV Battery Temperature Sensor 1 Circuit Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0A9D-00-Hybrid/EV Battery Temperature Sensor 1 Circuit Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0A9E-00-Hybrid/EV Battery Temperature Sensor 1 Circuit High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test