LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2024 >> Grand Cherokee Summit >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (2.0L - Engine (Service Information) (2 Of 4)) >> Cooling System >> Low Temperature Cooling System >> Standard Procedure >> Draining

Standard Procedure: Draining

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front belly pan. Refer to FRONT BELLY PAN .
  2. Remove the support and lower the vehicle.
  3. Remove the air cleaner body and clean air hose. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION  .
  4. Position a drain pan under the coolant hoses.
  5. Disconnect the low temp coolant pump inlet hose and drain the low temp cooling system.
    GC0203148Courtesy of CHRYSLER GROUP, LLC
    1 - Low Temp Coolant Pump 2 Inlet Hose
    2 - Low Temp Coolant Pump 2 Outlet Hose
  6. Once the system is completely drained, connect the low temp coolant pump inlet hose.