Rocker Arm, Valve: Installation
WARNING: This page is about a different variant/trim than selected.
INTAKE ROCKER ARMS
NOTE:
If the rocker arms are being reused, reassemble them into their original locations.
- Lubricate the rocker arms (1) with clean engine oil before installation.
- Install the rocker arm(s).
- Install the Variable Valve Actuator Assembly (VVAA). Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, INSTALLATION .
EXHAUST ROCKER ARMS
NOTE:
If the rocker arms are being reused, reassemble them into their original locations.
- Lubricate the rocker arms (1) with clean engine oil before installation.
- Install the rocker arm(s).
- Install the camshaft. Refer to CAMSHAFT, ENGINE, INSTALLATION .